Installation to the manufacturer’s instructions
Manufacturers make the warranty on a fence and gate conditional on, among other things, whether the installation has been carried out as described in the instructions. That’s why we install to the system manufacturer’s instructions and hand over a full set of documents at completion.
What the manufacturer’s warranty depends on
The Wiśniowski warranty card for fencing systems (version 05/2026) lists situations in which the warranty does not apply. These include:
- installation carried out by an unqualified person, not in line with the manufacturer’s instructions or with good building practice,
- damage caused by posts being in direct contact with the ground,
- installation at temperatures below −10°C,
- failure to carry out the paid periodic service required by the operating and maintenance instructions, confirmed by an entry in the warranty card, in the gate logbook (for motorised gates) or by a service report.
The card also sets a condition for the fence itself: it must be made entirely of the manufacturer’s components. For Konsport and Alfen systems, those manufacturers’ warranty terms apply.
Wiśniowski warranty periods
| What it covers | Period |
|---|---|
| Correct operation | 2 years |
| Anti-corrosion warranty: powder-coated aluminium fences | 10 years |
| Anti-corrosion warranty: galvanised, powder-coated steel residential fences | 10 years |
| Anti-corrosion warranty: industrial gates PI130, PI200, Slider, V-King, Traffic, Ultra and sliding gates on wheels | 5 years |
| Anti-corrosion warranty: hot-dip galvanised-only components | 2 years |
| Anti-corrosion warranty: fittings, handles, lock and hinge accessories, electrical equipment | 24 months |
| Paint coating: adhesion, peeling, blistering, gloss and colour | 2 years |
The periods run from the date of purchase, but the card also caps them by reference to the date of manufacture. The anti-corrosion warranty does not cover fences in very highly corrosive environments (category C5) or those standing less than 500 m from the sea coast. For hot-dip galvanised-only components, the period is shorter in C4 and C5 environments, and for fittings and electrical equipment in a C4 environment.
Based on the WIŚNIOWSKI warranty card for fencing systems (version 05/2026).
The terms of our own installation warranty are set out in the quotation.
Sliding gate foundations
A sliding gate runs on carriages bolted to the foundation, so the foundation must not shift or heave in frost. The manufacturers’ instructions set out the requirements:
- Wiśniowski (residential sliding gate): a foundation deeper than the frost line at the installation site, but no shallower than 120 cm, C20/C25 concrete.
- Konsport (cantilever gate up to 5.8 m): a depth of at least 1 m, adjusted to the local frost depth, a footing 40 cm wide and half the gate’s clear opening in length, concrete of at least B20.
We decide the depth at the site survey to suit the soil and the gate, and never go shallower than the manufacturer requires. More in our guide Sliding gate foundations – how deep and why.
What we hand over at completion
- the manufacturer’s warranty card, filled in and stamped by the seller and installer (if the manufacturer issues one, as Wiśniowski does),
- the operating and maintenance instructions,
- the handover report.
According to the Wiśniowski card, a warranty claim is based on proof of purchase, a fully completed warranty card (valid only once signed by the customer) and confirmation of periodic servicing. So it’s worth keeping these documents together. In the instructions for the Konsport cantilever gate, a signed handover report is a condition of the warranty on installation and correct operation; without it, the warranty covers manufacturing defects only.
Periodic gate servicing
The Wiśniowski card requires the paid periodic servicing set out in the operating and maintenance instructions. Each service must be confirmed by an entry in the warranty card, in the gate logbook (issued with motorised gates) or by a service report. Without this, the manufacturer will not honour the warranty. The scope and intervals of servicing are given in the instructions for the specific gate, so it’s worth checking them as soon as the gate has been handed over. Konsport’s instructions for the cantilever gate recommend a service once a year, after the winter. We carry out servicing for a fee.
What to check when comparing quotations
- Foundation: whether it will be built to the gate manufacturer’s instructions and how deep it will be.
- Posts and base: whether they are included in the price and how they are made.
- Gate motor: whether photocells and a warning light are included in the kit.
- Transport: whether delivery is included in the price.
- Installation and handover: whether the quotation includes installation and handover with a signed report.
- Manufacturer’s warranty card: whether it will be filled in and stamped at handover.
- RAL colour: the colour number and coating texture for each element.
- Timing: when delivery and installation will take place.
Request a quote including installation
We’ll come out for a site survey and prepare the quote within 7 working days of it. There is a charge for the site survey, and its cost is deducted from your order.