Call: +48 22 266 25 58
Wiśniowski winter promotion: garage doors with openers up to −25%, fences and doors up to −15%, orders by 31 DecemberGarage doors up to −25% · until 31 DecemberDetails ›
Home › Blog › Konsport, Alfen or Wiśniowski: fencing systems compared
Comparisons

Konsport, Alfen or Wiśniowski: comparing fencing systems

20 July 2026 · 4 min read · Ogrodzenia ISS

None of the three manufacturers is the best at everything. Konsport has the widest range of designs, Alfen makes aluminium only, with no welds, and Wiśniowski is the only one to supply the fence, garage door and front door from a single palette. Below is a comparison against the criteria that decide the choice: material, design, gates, maintenance, and who each one suits.

The three manufacturers at a glance

Konsport is a Polish manufacturer of steel and aluminium fences and gates, with a wide range of designs, from light palisades to solid slatted panels. Alfen makes 100% aluminium fences, with no welds, made to measure; it’s the premium end of the market, for houses with simple lines. Wiśniowski is the largest of the three: fences, driveway gates, garage doors and front doors in one palette. It’s the only one that lets you buy the whole frontage (fence, garage door, front door) from a single manufacturer.

Comparison table

CriterionKonsportAlfenWiśniowski
MaterialGalvanised, powder-coated steel; selected aluminium linesAluminium only, no weldingSteel and aluminium, depending on the line
DesignA very wide range: slats, palisades, mesh panels, in-house designsMinimalist horizontal and vertical slats, solid designs; concealed fixingsFrom classic to slats; the same colour and design on the garage door and front door
Driveway gatesSliding and double swing, in every designSliding and double swingSliding and double swing, with own-brand automation
Garage doors and front doorsNoNoYes: sectional, up-and-over, front doors
ManufactureCatalogue sizes and made to measureMade to measure, numbered componentsCatalogue sizes and made to measure
MaintenanceSteel: check the coating; aluminium: washingWashingDepends on the material
Price level (approximate)Mid-rangeHigherMid to higher
Main strengthChoice of designs and value for moneyDurability and clean detailingThe whole frontage from one manufacturer
Who it suitsA specific design on a sensible budgetA house with simple lines, no upkeep, attention to detailA garage door and front door in the fence colour

Price levels are approximate and depend on the design, height and length; you get actual figures in the quote after the site survey.

Three questions before choosing a system

  1. Garage door and front door in the project. If they’re to be in the same colour and style as the fence, Wiśniowski has the advantage of a single palette. You can also mix: a Konsport or Alfen fence with a Wiśniowski garage door and front door, matching the colour by RAL number and coating texture.
  2. Salt and damp. Next to a busy road that’s salted in winter, or on waterlogged ground, aluminium comes out ahead (Alfen, or the aluminium lines from Konsport and Wiśniowski). Aluminium doesn’t rust, but road salt does corrode it, which is why the coating matters; the corrosivity category (the highest is CX) is given in the product sheet.
  3. Design or detail. If you have your eye on a particular design, check who offers it (Konsport has the widest range). If what matters to you is the details you don’t see (concealed fixings, no welds), the choice is Alfen.
Mixing manufacturers is perfectly normal: e.g. an Alfen fence with a Wiśniowski garage door and front door in RAL 7016. The colour is matched by RAL number and coating texture, because trade names vary: Wiśniowski calls RAL 7016 ‘graphite’, other manufacturers call it ‘anthracite’, and graphite proper is RAL 7024. The same number in a different texture and from a different coating plant can vary in shade, so samples need to be compared side by side.

What the catalogue doesn’t show

Every manufacturer shows its products in the best light. Three things only become clear after installation: how the system copes with a sloping site (stepping the panels), what the joints look like at the gate posts, and whether made-to-measure panels arrive within tolerances that don’t call for cutting. Before deciding, it’s worth looking at a finished installation on a plot with a similar layout; a sample won’t show you that.

Frequently asked questions

Which system is the most durable?

Installed correctly, all three last for years. Full aluminium gives the greatest corrosion resistance (Alfen and the aluminium lines from the other two manufacturers); steel needs its coating checked and any damage touched up.

Is every manufacturer’s sliding gate a cantilever gate?

Yes. With Wiśniowski, Konsport and Alfen, the sliding gate is a cantilever design: there is no rail or track across the entrance. It does, however, need room to slide back along the fence, about 1.5 × the clear opening (a 4 m entrance needs about 6 m), plus a footing for the motor and counterbalance as set out in the manufacturer’s guidelines.

Are you tied to one manufacturer?

We’re an authorised dealer for all three: Wiśniowski, Konsport and Alfen. We choose the system to suit the property and the budget.

Sources

Quote after a site survey

We’ll come out for a site survey and prepare a quote within 7 working days of it. There is a charge for the site survey because it covers travel, measurements including levels, and choosing the system; the cost is agreed individually and deducted from your order. Manufacturer’s warranty – Wiśniowski fences come with an anti-corrosion warranty of up to 10 years. The terms of our own installation warranty are set out in the quotation.

Request a quote