How to look after an aluminium fence
Aluminium doesn’t rust, but road salt does corrode it, so a fence along a road that’s salted in winter needs washing in spring. Beyond that, it’s a wash once a year, cleaning the photocells and the sliding gate’s carriages, and touching up the paint after a scratch. Below: a list of jobs and a plan for the whole year.
Washing
All it takes is washing the fence once or twice a year with water and a mild detergent, using a soft cloth or sponge. This removes dust, pollen and deposits that dull the colour over time. Next to a road that’s salted in winter, do the first wash in early spring, before salt and grit have sat on the coating for long.
- Don’t use stiff brushes or scouring powders, as they will scratch the coating.
- Don’t use a pressure washer at close range; a powerful jet can damage the paint along the edges.
Gate automation
- Wipe the photocells every few weeks: when they’re dirty, they can detect an obstacle that isn’t there, and the gate won’t close.
- On a cantilever sliding gate, check that leaves and small stones aren’t building up on the carriages, on the end roller or in the catcher.
- Replace the batteries in the remotes before they go completely flat.
- Don’t change the motor force settings. Adjustment with force measurement is a job for a service technician.
Fixings and hinges
Once a season, check the panel fixings and the pedestrian gate hinges. Tightening a loose screw in good time takes a minute and stops the hole wearing or the gate dropping.
Coating damage
Seal a deeper chip with a dab of the manufacturer’s touch-up paint in the right RAL colour: clean, degrease, apply thinly. Aluminium won’t rust under a scratch, but next to a salted road a white bloom can appear on the exposed spot, and the scratch itself spoils the look.
A plan for the whole year
An aluminium fence doesn’t need much, but regular care makes a visible difference. The plan for the year:
- Spring: wash the whole fence with water and a mild detergent (winter leaves salt and grit on the coating); clean the photocells, the carriages and the sliding gate’s gear rack.
- Summer: check the pedestrian gate hinges and self-closer, tighten anything that’s come loose, remove climbing plants from the panels.
- Autumn: a second wash (pollen, leaves); clear the drainage openings in the plinth; check that the motor cover is properly closed.
- Winter: clear snow from the strip under the sliding gate leaf (clearance of about 10 cm); clean the carriages, end roller and catcher; don’t spread salt right next to the fence.
That adds up to a few hours a year. In return, after several winters your aluminium fence looks almost as it did on the day it was installed.
Frequently asked questions
Can I clean the fence with a pressure washer?
Yes, with care: low pressure, a wide nozzle, at least half a metre away, and without aiming at the profile joints or the motor seals. A garden hose and a soft brush are safer for the coating.
How do I remove limescale marks or bird droppings?
Warm water with a mild detergent and a soft sponge; for stubborn marks, a product designed for powder coatings. Never abrasive powders, acetone or solvents.
Quote after a site survey
We’ll come out for a site survey and prepare a quote within 7 working days of it. There is a charge for the site survey because it covers travel, measurements including levels, and choosing the system; the cost is agreed individually and deducted from your order. Manufacturer’s warranty – Wiśniowski fences come with an anti-corrosion warranty of up to 10 years. The terms of our own installation warranty are set out in the quotation.
Request a quote