Renovating or replacing a fence
An old fence can sometimes be saved with a grinder, primer and paint. Sometimes renovation costs as much as a new fence and the result is worse. Which route makes sense depends on the posts, the foundations and the condition of the steel, in that order. Below, how to assess it and when it pays to keep the posts and replace only the panels.
Posts and foundations first
The panels are what you see, but durability depends on the posts and what they are set in. If the posts are leaning, move when you touch them or have rust at the base, renovating the panels won’t help, because a year later they will be crooked again. Steel posts corroded at ground level are almost always a sign that replacement is due.
Surface rust or pitting
Surface rust on a steel fence is a job for a grinder, primer and paint; on short stretches it makes sense. With pitting, material loss and profiles rusted through, painting is cosmetic and lasts a season. Holes at the welds or at the bottom of the profiles are a sign to price up a replacement.
Mesh and welded panels
Old mesh and welded panels are rarely worth repairing. Usually the best compromise is to replace the panels with a new system while keeping the existing, sound posts, provided their spacing and height suit the new panels. Spacing and height are checked at the site survey.
When renovation makes sense
- A well-built wrought-iron or steel fence with only surface rust.
- Sound posts and foundations; the problem is only in the coating.
- A short section, e.g. a pedestrian gate and two panels, with the rest intact.
When to replace
- Leaning or corroded posts, cracked foundations.
- Profiles rusted through, loose welds, mesh with holes.
- A change of look: slats on old posts meant for mesh won’t look good.
Replacing panels on old posts
The sound posts and foundations stay; the panels, pedestrian gate and driveway gate are replaced. The spacing of the existing posts must suit the length of the new panels, and their height must suit the new system. For non-standard spacing, manufacturers make panels to measure, so it can usually be made to work. The posts need cleaning and checking for plumb and for how securely they sit in the foundation; a weak post is replaced on its own, without touching the rest.
If the old posts are steel and the new panels aluminium, they are joined with system brackets with a spacer, to avoid corrosion where the two metals meet. The result is a new fence without breaking out the foundations or any groundwork.
Frequently asked questions
What happens to the old fence?
It has to be dismantled and disposed of. Scrap metal dealers take steel and mesh, and rubble from the foundations goes to a construction waste collection point. Dismantling and removal need to be planned before the new fence is installed, and who will do them has to be agreed before the order is signed.
How long does it take to replace panels on existing posts?
Installing the panels alone, with no groundwork, usually takes a day or two for a typical frontage. On top of that comes the production time for made-to-measure panels, which the manufacturer gives when confirming the order.
Will the new panels match the colour of the old posts?
The posts can be repainted (after preparation) in the colour of the new system or hidden with covers. In most cases, though, the difference in shade is visible, which is why for the front it is better to price up a full replacement including the posts.
Quote after a site survey
We’ll come out for a site survey and prepare a quote within 7 working days of it. There is a charge for the site survey because it covers travel, measurements including levels, and choosing the system; the cost is agreed individually and deducted from your order. Manufacturer’s warranty – Wiśniowski fences come with an anti-corrosion warranty of up to 10 years. The terms of our own installation warranty are set out in the quotation.
Request a quote