How to avoid voiding the warranty on your fence and gate
A fence and gate warranty is more than the number of years in the brochure. The warranty card also sets out conditions, and most of them concern installation and what happens to the fence afterwards. Taking Wiśniowski’s warranty card for fencing systems (version 05/2026) as an example: what the warranty covers, when it stops applying and what to do so that you don’t lose it.
How long the warranty lasts
The card distinguishes between a warranty for correct operation, an anti-corrosion warranty and a warranty on the paint coating. The periods run from the date of sale (the card also caps them by time from the date of manufacture), and how long they are depends on the finish:
| What it covers | Period |
|---|---|
| Correct operation | 2 years |
| Anti-corrosion warranty: powder-coated aluminium fences | 10 years |
| Anti-corrosion warranty: galvanised, powder-coated steel residential fences | 10 years |
| Anti-corrosion warranty: industrial gates PI130, PI200, Slider, V-King, Traffic, Ultra and sliding gates on wheels | 5 years |
| Anti-corrosion warranty: hot-dip galvanised-only components | 2 years |
| Anti-corrosion warranty: fittings, handles, lock and hinge accessories, electrical equipment | 24 months |
| Paint coating: adhesion, peeling, blistering, gloss and colour | 2 years |
Based on the WIŚNIOWSKI warranty card for fencing systems (version 05/2026).
The anti-corrosion warranty does not cover fences in very highly corrosive environments (category C5), or those standing less than 500 m from the sea shore. For parts that are only hot-dip galvanised, the period is shorter in C4 and C5 environments, and for hardware and electrical equipment it is shorter in a C4 environment.
Other manufacturers have their own warranty cards and instructions. For example, in Konsport’s cantilever gate instructions, the warranty on installation and correct operation is conditional on a signed handover report; without one, the warranty covers manufacturing defects only.
1. Installation according to the manufacturer’s instructions
The card does not cover installation carried out by an unqualified person, contrary to the manufacturer’s instructions or contrary to good building practice. The instructions specify, among other things, the foundations, how posts are set and how components are fixed. For a Wiśniowski sliding gate, the foundation must go below the frost zone and be at least 120 cm deep. We go into detail in our post on sliding gate foundations.
The card also excludes installation at temperatures below −10°C. So for a winter installation, the date also depends on the weather.
Wiśniowski’s own foundation instructions for sliding gates point out that whether a foundation is built correctly depends on the ground and groundwater conditions. That’s why we set the depth at the site survey to suit the ground and the gate, and never shallower than the manufacturer requires.
2. Posts in concrete, not in soil
The warranty does not cover damage caused by fence components, such as posts, being in direct contact with any kind of soil. The card says so plainly: contact with soil speeds up corrosion and means losing the anti-corrosion warranty. So the post is set in a concrete foundation in such a way that it doesn’t touch the earth directly.
Even after installation, raising the lawn level, banking soil up against the fence or piling a thick layer of earth around the posts brings the posts back into contact with the soil.
3. The whole fence made from the manufacturer’s components
The card requires the fence to be built entirely from the manufacturer’s components. Corrosion caused by another company’s components is also excluded from the warranty. If you extend the fence, e.g. with an extra pedestrian gate or more panels, it’s best to order components from the same system.
4. Maintenance and cleaning
The card does not cover damage to the coating resulting from failure to carry out the maintenance described in the instructions, or damage from a direct jet of water, e.g. from a pressure washer. Damage from substances such as cement, lime or salts is also excluded. Worth bearing in mind if building work is still going on next to the finished fence.
5. Periodic servicing
The card voids the warranty if the paid periodic service set out in the operation and maintenance instructions has not been carried out. The service must be confirmed by an entry in the warranty card or the gate logbook (issued with motorised gates), or by a service report. The scope and timing of services are given in the instructions for the specific gate. For comparison, Konsport’s cantilever gate instructions recommend a service once a year, after winter.
We carry out servicing for a fee. The simplest thing is to put the date from the instructions in your calendar as soon as the gate has been handed over.
6. The warranty card and handover documents
At handover, we give you:
- the manufacturer’s warranty card, filled in and stamped by the seller and installer,
- the operating and maintenance instructions,
- the handover report.
The card is only valid once it has been filled in and signed by the customer. A warranty claim rests on proof of purchase, a fully completed card and confirmation of periodic servicing, plus, for motorised gates issued with a gate logbook, the logbook itself. It’s best to keep these documents together.
If something goes wrong
According to Wiśniowski’s card, complaints are accepted by the outlet where the product was bought. They must be made in writing, without delay, and no later than 14 days after the defect is found. Missing items and damage visible when the delivery is received must be reported within 3 days at the latest, and visible defects before installation. A defective gate should not be used any further.
It’s worth attaching photos to your complaint and having the card, proof of purchase and handover report to hand. The card also states that the warranty does not exclude, limit or suspend your rights under the statutory provisions on liability for defects (rękojmia).
Quick checklist
- Installation according to the manufacturer’s instructions, not at temperatures below −10°C.
- Posts in concrete, with no direct contact with soil, including after any work in the garden.
- The whole fence made from the manufacturer’s components.
- Maintenance according to the instructions, with no pressure washer aimed directly at the coating.
- Periodic servicing at the intervals in the instructions, recorded in the card or gate logbook, or with a service report.
- A filled-in, stamped and signed warranty card kept with your documents.
- Faults reported in writing, no later than 14 days after you notice them.
What about a warranty on the installation?
Wiśniowski’s card covers the product. The terms of our installation warranty are set out in the offer, and how we install is described on the Installation to the manufacturer’s instructions page.
Frequently asked questions
Do galvanised-only fences also have an anti-corrosion warranty?
Yes, but a shorter one. According to Wiśniowski’s card, parts that are only hot-dip galvanised have a 2-year anti-corrosion warranty (15 months in a C4 environment, 12 months in C5), while galvanised and powder-coated steel residential fences get 10 years.
Quote after a site survey
We’ll come out to do a site survey and prepare a quote within 7 working days of the survey. There is a charge for the site survey, as it covers travel, measurements including levels and choosing the system; the cost is agreed individually and deducted from your order. Manufacturer’s warranty: for Wiśniowski fences, up to 10 years’ anti-corrosion warranty. The terms of our installation warranty are set out in the offer.
Request a quote