Call: +48 22 266 25 58
Wiśniowski winter promotion: garage doors with openers up to −25%, fences and doors up to −15%, orders by 31 DecemberGarage doors up to −25% · until 31 DecemberDetails ›
Home › Blog › What to plan before installing a pedestrian gate with an intercom
Installation in practice

What to plan before installing a pedestrian gate with an intercom

2 September 2025 · 3 min read · Ogrodzenia ISS

The usual story: the fence is up, the block paving is down, and only then does someone remember the intercom. That leaves a channel cut through the new paving or a cable run ‘on the surface’. To avoid this, four things need settling before the fence goes in: the duct route, the power supply, where the panel goes in the post, and the type of electric lock.

Power and cabling

An intercom needs power and a connection to the house. That means a cable from the building to the pedestrian gate post, run in a duct under the future paving. For a video intercom, allow for a network cable (twisted pair) from the start, even if you’re choosing a simpler model for now. The duct stays in the ground and the cable can be replaced later.

  • A duct from the house to the gate post, with room for a bend and a possible second line.
  • Power for the panel and the electric strike, usually with the power supply unit inside the building.
  • Space in the post for the panel: mounting height, street side, protection from rain.

Electric strike or magnetic lock

An electric strike is the most common choice for garden gates: press the button in the house and it releases the lock so the gate can be pushed open. An electromagnetic lock holds more firmly, but it needs constant power and the gate leaf has to be prepared differently. For a detached house, an electric strike with a memory function is usually enough: once you release it from your phone, the gate stays unlocked until it is next opened, so a courier can still get in even if they reach it a little later.

It’s best to order a post with an intercom and electric strike as part of the fence system: the manufacturer prepares the holes and cable entries at the factory. Drilling into a finished, coated post always puts the coating at risk.

Intercom panel in the post or on a separate pillar

With slatted fences, the panel is most often fitted into the gate post: it looks like part of the system and needs no extra element. A separate pillar makes sense when the pedestrian gate is a long way from the driveway and you need a single point for guests and couriers, or when the letterbox and house number are to go in the same place.

What to decide before the site survey

Before the survey, make a note of where the cables will run, which post the panel will go in and at what height, which way the gate opens and where the power supply will go in the house. If you’ve already chosen the intercom model, have its data sheet ready with the panel and back box dimensions: the post is prepared for a specific panel.

Video intercom and lighting at the gate

The picture from a video intercom camera is only as good as the light at the gate. A camera in the shadow of the post with no lighting shows a silhouette rather than a face at night. That’s why the panel is planned together with the lighting: a small lamp above the panel or an LED in the post sorts it out. The viewing angle matters too: a panel on the gate post should ‘look’ at the person standing in front of the gate, with the street only in the background.

More and more intercoms connect to a phone app: you can see who’s calling and open the gate remotely for a courier, cleaner or family member. This needs a connection to your home network, so a network cable or reliable Wi-Fi at the gate has to be planned along with the rest of the wiring.

Frequently asked questions

Electric strike: normally closed or normally open?

For a home gate, usually ‘normally closed’ (fail-secure: it releases on a pulse), so in a power cut the gate stays locked and is opened with a key. The ‘normally open’ (fail-safe) version is used on escape routes, where a loss of power has to open the way through.

Can the intercom be connected to the driveway gate?

Yes, one panel can control both the pedestrian gate and the driveway gate (separate buttons or codes). This needs deciding before you order the automation, so that the gate’s control unit has a free control input.

Can the pedestrian gate be opened with the driveway gate remote?

Yes, if the electric strike is wired to the gate’s control unit or to a separate radio receiver. Handy when you come home on foot and the remote is on your key ring.

Quote after a site survey

We’ll come out for a site survey and prepare a quote within 7 working days of it. There is a charge for the site survey because it covers travel, measurements including levels, and choosing the system; the cost is agreed individually and deducted from your order. Manufacturer’s warranty – Wiśniowski fences come with an anti-corrosion warranty of up to 10 years. The terms of our own installation warranty are set out in the quotation.

Request a quote