Call: +48 22 266 25 58
Wiśniowski winter promotion: garage doors with openers up to −25%, fences and doors up to −15%, orders by 31 DecemberGarage doors up to −25% · until 31 DecemberDetails ›
Home › Blog › Slatted, panel or mesh fencing: a 10-year cost comparison
Comparisons

Slat, panel or mesh fence: a 10-year cost comparison

24 November 2025 · 3 min read · Ogrodzenia ISS

The price per metre of panel is only part of what a fence costs. A fence stands for 15–20 years, and over that time you add installation, maintenance, repairs and sometimes replacement. Below, the three most common types (aluminium slats, steel panels, mesh) compared over a ten-year horizon, with a table and three scenarios: a house, a holiday plot, a business.

The three types in brief

  • Aluminium slats: horizontal or vertical profiles; maintenance-free; privacy adjusted by the gap.
  • Steel panels (2D/3D): welded wire panels; cheap, quick to install, see-through.
  • Wire mesh fencing: the cheapest option, lightweight, for temporary fencing and purely functional boundaries.

10-year comparison

CriterionAluminium slatsSteel panels 2D/3DMesh
Purchase and installation costHighLow to mediumLowest
Maintenance (10 years)WashingChecking the coating, touch-ups at the weldsRe-tensioning, replacing damaged sections
Coating durabilityVery high; aluminium does not rustGood with galvanising and powder coating; welds are the weak pointsLow to medium
PrivacyFull, or adjustable via the gapNone (see-through), unless fitted with privacy stripsNone
AppearanceArchitectural, adds value to the propertyTechnical, neutralUtilitarian
Matching gates in the systemYes, in the same designYes, in a panel versionUsually a different construction
WindPost spacing has to be planned for solid infillSee-through, low loadMinimal
Dogs / childrenGap to be agreed; bottom closed off by a plinthMesh openings approx. 5×20 cm; a small dog will get throughEasy to dig under or push apart
Value after 10 yearsLooks like new after washingSigns of corrosion at the welds if neglectedUsually needs replacing
Best useFront and sides of the house, privacySides and back, plots, budget frontagesFunctional boundaries, temporary fencing, the back of large plots

Three scenarios

Detached house in Piaseczno, 60 m of fencing

A 15 m frontage in aluminium slats (looks, privacy, driveway and pedestrian gates in the same design), and 45 m along the sides and back in 3D panels in the same RAL colour. A smart frontage, a sensible overall cost and one colour across the whole plot.

Holiday plot, 120 m

3D panels all round, a system plinth only along the road, a panel pedestrian gate. Mesh would be cheaper, but after a few seasons it needs re-tensioning and looks temporary. Panels cost only a little more and stand for years without maintenance.

Business or warehouse, 300 m

Tall 2D panels with thicker wire and top-edge protection; slats along the office frontage for the company’s image. On long runs, the cost per metre and durability are what count; slats all the way round would make no economic sense.

The money goes on the stretches people see: the frontage and the line by the terrace, in a system that gives privacy and good looks. The back and functional boundaries get panels in the same colour. Nobody will notice the difference from the street; in the quote you see it straight away.

How to read a price per metre

The panels are only part of what a fence costs. The rest is posts, foundations, the plinth, gates and installation, and these items cost much the same whatever type of panel you choose. That is why the difference in total cost between a ‘cheap’ and a ‘more expensive’ system is often smaller than the price per metre suggests. In the quote after the site survey, each of these items is listed separately.

Frequently asked questions

Can steel panels be replaced with slats later?

Yes, if the post spacing and height suit the new system. Then only the panels are replaced, with no groundwork, and manufacturers make panels to measure for non-standard spacing.

Why are slats more expensive than panels?

More material (solid profiles), made-to-measure production, concealed fixings and system posts. In return you get privacy, good looks and no maintenance beyond washing.

Sources

Quote after a site survey

We’ll come out for a site survey and prepare a quote within 7 working days of it. There is a charge for the site survey because it covers travel, measurements including levels, and choosing the system; the cost is agreed individually and deducted from your order. Manufacturer’s warranty – Wiśniowski fences come with an anti-corrosion warranty of up to 10 years. The terms of our own installation warranty are set out in the quotation.

Request a quote