Why horizontal slat fences are so popular
Horizontal slat fences are now the most popular design for new houses around Piaseczno and Warsaw. There are three reasons: the horizontal line suits simple flat-roofed houses, the gap between the slats can be set to give the privacy you need, and aluminium slats are light and stay rigid over long panels. Below, what this means for post spacing, the driveway gate and the pedestrian gate.
Horizontal lines and the shape of the house
Horizontal lines make a plot look wider and lead the eye along the fence. The design suits simple flat-roofed houses, large areas of glazing and façades clad in timber boards or fibre-cement panels; next to a house with a hipped roof and columns at the entrance it will look out of place.
Gaps and privacy
The biggest advantage of slats is that you can choose the gap between them:
- Wider gaps: a lighter look, more light, less wind load.
- Narrower gaps or solid slats: screening from the street, but the posts work almost as hard as with a solid panel.
- Angled (louvred) slats: block the view from street level but let light and air through.
Aluminium slats
Slats work best in aluminium: the profiles are light and rigid, so panels can be longer without visible reinforcement, and scratches don’t rust. Steel slats are heavier and cheaper; they work well in simpler panel systems and with shorter panels, but any damage to the coating that reaches the metal has to be sealed.
Driveway and pedestrian gates in the same design
A horizontal fence looks best when the driveway gate and pedestrian gate have the same slat profile and the same gap, and the garage door has horizontal ribbing in the same colour. Judge the design along the whole frontage: slats look different on a single panel than over 25 m with a driveway gate and pedestrian gate, which is why the rhythm of the posts and the position of the gate within the whole run matter.
Post spacing and panel length
The appeal of horizontal slats comes from long, unbroken lines. The longer the panel, the calmer the rhythm, but also the greater the wind load and the more is demanded of the posts. With solid or dense slats, post spacing is usually up to approx. 2–2.5 m; with wider gaps manufacturers allow more, and the exact figures are given in the system data sheet. At the site survey, the spacing is worked out so that the posts fall evenly along the whole length and the gates don’t break the rhythm with an odd-sized section.
The second detail is concealed fixing: in aluminium systems (e.g. Alfen, Konsport) the slats slot into the post profile with no visible screws. Having no screws on the face is what makes the difference between a fence that looks off the shelf and one that looks like part of the architecture. So when ordering, you need to specify: the slat profile and height, the gap (separately for the street and garden sides), the post spacing from the survey, and the design of the driveway and pedestrian gates in the same system.
Frequently asked questions
Are horizontal slats wind-resistant?
Yes, if the post spacing and foundation depth (at least down to the frost line, 1.0 m for Piaseczno) are matched to the gap. Solid slats on an open, windy plot need closer post spacing, as set out in the manufacturer’s system data sheet.
Does dirt build up between the slats?
With a 2–3 cm gap and slightly angled slats, water runs off freely. Hosing down once or twice a year is enough; dust and pollen have nothing to cling to.
Quote after a site survey
We’ll come out for a site survey and prepare a quote within 7 working days of it. There is a charge for the site survey because it covers travel, measurements including levels, and choosing the system; the cost is agreed individually and deducted from your order. Manufacturer’s warranty – Wiśniowski fences come with an anti-corrosion warranty of up to 10 years. The terms of our own installation warranty are set out in the quotation.
Request a quote