Call: +48 22 266 25 58
Wiśniowski winter promotion: garage doors with openers up to −25%, fences and doors up to −15%, orders by 31 DecemberGarage doors up to −25% · until 31 DecemberDetails ›
Home › Blog › Sliding or double swing gate? How to choose for your plot
Choosing

Sliding or double swing gate? How to choose for your plot

26 February 2026 · 4 min read · Ogrodzenia ISS

The type of driveway gate is chosen to suit the plot: how much free space there is along the fence, which way the driveway slopes and how you turn in from the road. Below is a comparison of cantilever sliding gates and double swing gates in terms of space, terrain, wind, winter, automation and price.

Sliding gate

The leaf slides sideways, along the fence. Sliding gates from Wiśniowski, Konsport and Alfen are cantilevered: the leaf, with its counterweight, runs on roller carriages next to the post, with no track across the entrance. Today this is the most common choice for short driveways and uphill entrances.

  • It needs no room to open forwards or backwards, so a car can be parked right behind the gate.
  • A slope is not a problem if it runs across the gate line, i.e. the driveway rises into the plot. A slope along the fence, over the stretch where the gate slides back, has to be levelled.
  • It copes well with wind: the leaf is guided on roller carriages and held in the catcher when closed.
  • It needs room to slide back along the fence of approx. 1.5 × the clear width of the entrance. For a 4 m entrance, that means about 6 m of free fence line for the leaf and counterweight.

Shortened counterweight

Manufacturers offer sliding gates with a shortened counterweight (also listed in catalogues as ‘without counterweight’). When open, they take up less of the fence line, which saves the day on narrow frontages that don’t have 6 m to slide back into. The exact slide-back length is given on the system data sheet.

Double swing gate

Two hinged leaves that open into the plot. For the same width, it is usually cheaper than a sliding gate and suits symmetrical, formal entrances, but it has its own requirements.

  • It needs free space behind the gate for the leaves to swing open. For a 4 m entrance, each leaf is about 2 m wide and takes up that much space when open.
  • A driveway that rises into the plot will stop the leaves after they have opened a few dozen centimetres. In that case the strip under the leaves has to be levelled, or you choose a sliding gate.
  • It is more vulnerable to strong wind, especially with solid infill, because the leaves work on hinges and operators.
  • A car can’t be parked right behind the gate; the leaves need room to open.
Little space behind the gate, an uphill driveway or frequent comings and goings during the day all point to a sliding gate. A wide, flat, formal entrance and a smaller budget point to a double swing gate.
CriterionSliding gateDouble swing gate
Space neededAlong the fence: approx. 1.5 × the clear width (leaf and counterweight)Behind the gate: the swing radius of the leaves
Driveway slopeNot an issue if it runs into the plot; the slide-back stretch along the fence must be levelA problem on an incline: the leaves catch on the driveway
Short driveway, car right behind the gateNo problemThe leaves need clear space
Wide entrances (5–6 m)A single leafHeavy, long leaves, larger operators
WinterClearing snow from the strip under the leaf and the slide-back stretchClearing snow from the area where the leaves open
AutomationOne motor by the postTwo operators, more careful set-up
Price (comparable width)Usually higher (counterweight, longer foundation footing)Usually lower
Entrance directly from the streetNothing sticks out into the roadLeaves open into the plot only

Automation

Both types can be fitted with motors with remotes, photocells and a warning light, with the option of smartphone control. A sliding gate has one motor on a foundation footing next to the post; a double swing gate has two operators, either articulated-arm or underground. Cables for the motor, photocells and warning light run in ducts under the driveway, which is why automation is planned together with the fence, before the paving is laid.

What to check before you choose

For a sliding gate, measure the free stretch of fence from the post in the direction the gate will slide. For a 4 m entrance you need about 6 m for the leaf and counterweight. If there is a pedestrian gate, a tree, a well or the plot boundary just beyond the post, there may not be enough room, which leaves you with a shortened-counterweight version or a double swing gate. For a double swing gate, check that the leaves have room to open: a driveway that slopes up towards the house will stop them after a few dozen centimetres.

The second point is the angle at which you turn in from the road. Turning in from a narrow street calls for a wider gate than driving straight in from an access road. This is a common reason why a gate that is 4 m ‘on paper’ turns out to be too narrow for everyday use. For a passenger car, a typical clear width is 4–5 m; if you are turning in from a narrow street or have a larger vehicle, it’s better to allow 5–6 m, which for a sliding gate simply means a longer leaf, and for a double swing gate heavier leaves and more powerful operators. The slide-back stretch, slopes and entry angle are checked during a site survey with levels, before the gate type is chosen.

Quote after a site survey

We’ll come out for a site survey and prepare a quote within 7 working days of it. There is a charge for the site survey because it covers travel, measurements including levels, and choosing the system; the cost is agreed individually and deducted from your order. Manufacturer’s warranty – Wiśniowski fences come with an anti-corrosion warranty of up to 10 years. The terms of our own installation warranty are set out in the quotation.

Request a quote