Call: +48 22 266 25 58
Wiśniowski winter promotion: garage doors with openers up to −25%, fences and doors up to −15%, orders by 31 DecemberGarage doors up to −25% · until 31 DecemberDetails ›
Home › Blog › Fence plinth: concrete gravel boards or split-face blocks
Choosing

Fence plinth: concrete gravel boards or split-face blocks

2 February 2026 · updated 6 October 2026 · 3 min read · Ogrodzenia ISS

A plinth separates the panels from the ground (less mud, less corrosion, less digging under) and tidies up the bottom line of the fence on uneven ground. There are two options: system concrete gravel boards slotted between the posts, or a masonry plinth wall of split-face blocks on a strip footing. Below, a comparison of cost, installation time and appearance, plus two things that are easy to forget: drainage and the overall height of the fence.

System plinth (precast)

These are ready-made concrete boards and connectors slotted between the posts. Their biggest advantages are quick installation and a predictable result: everything is straight and uniform.

  • Installed together with the posts, with no mortar and no drying time.
  • Easy to run along a gentle slope, board by board.
  • Choice of colour and texture (smooth, split-face, gneiss-effect).

Masonry plinth of split-face blocks

A classic that looks solid. Split-face blocks are laid on a strip footing, which makes the plinth continuous and very strong.

  • A sense of mass and permanence.
  • Complete freedom over height and shape, including curves.
  • Needs a footing, mortar and time to set, so it is more expensive and slower.
On a level plot, when time matters, a system plinth is the better choice. For an imposing frontage, a steeper slope, or when the fence is meant to look heavy and solid, a masonry plinth of blocks is the better option.
CriterionSystem plinth (precast)Masonry plinth (split-face blocks)
Installation timeTogether with the posts, no bricklayingFooting, bricklaying, setting, finishing
CostLowerHigher (labour, materials, continuous footing)
AppearanceConcrete, smooth or textured; understatedSolid, stone-like, imposing
Sloping groundStepped in segmentsCan follow the slope
FoundationPad footings under the postsContinuous strip footing
Repair / replacementReplace a single boardMasonry work
SuitsAluminium systems, slats and panelsWrought-iron and classic fences, masonry posts

Drainage

Whichever option you choose, the plinth must not form a ‘basin’ that traps water on the plot. Rainwater drains away through openings in the plinth, planned at the lowest points of each run. Expansion joints have a different job: on long runs they protect the plinth from cracking as the temperature changes.

A plinth for an aluminium fence

For aluminium slat fences, the usual choice is a system plinth in a colour close to the panels, or a deliberate contrast (light concrete and anthracite slats). A plinth in the shade of the posts (graphite, anthracite) or in neutral concrete grey gives the calmest result. A light plinth under a dark fence visually ‘cuts’ the fence off from the ground: sometimes that is intended, more often it is accidental.

Plinth height

A plinth closes off the space under the panel and lifts the whole fence above the grass and snow. Usually 20–30 cm above the ground is enough. A higher plinth (40–60 cm) makes sense when the panels are to be lower or when light slats are meant to sit on a heavy base. Fence height is measured from ground level to the highest point, including posts and caps, so the plinth counts towards the total. You need to take this into account where the local zoning plan sets a limit, or near the 2.2 m threshold above which a fence requires a notification.

Frequently asked questions

Will a system plinth withstand frost?

Yes, precast concrete boards are designed for outdoor use. What matters is drainage at the bottom and not banking soil up above the bottom edge of the plinth, so that water doesn’t sit against the concrete.

Can a fence be built without a plinth?

It can, especially with fences that have gaps. But expect grass under the panels, animals squeezing through and the bottom slats getting dirty faster. On the front section, a plinth is almost always the better choice.

Legal position as of October 2026. General information, not legal advice.

Quote after a site survey

We’ll come out for a site survey and prepare a quote within 7 working days of it. There is a charge for the site survey because it covers travel, measurements including levels, and choosing the system; the cost is agreed individually and deducted from your order. Manufacturer’s warranty – Wiśniowski fences come with an anti-corrosion warranty of up to 10 years. The terms of our own installation warranty are set out in the quotation.

Request a quote